YY(Q)W Horizontal gas Thermal fluid (hot oil) heater—Product

YY(Q)W Horizontal gas Thermal fluid (hot oil) heater

ModelYY(Q)W
FuelNatural gas, gas, biogas
Capacity0.7~14.0 MW
Pressure0.8~1.0 MPa
ApplicationPetrochemicals.Textiles.Printing and dyeing.Plastics.Rubber.Food processing.Wood processing.Asphalt heating.Carton production

Inquiry Now

7*24h Online 400-161-0099

Case Service

Detail Parameter Advantage Case

Product Detail Product introduction

　　Gas-fired heat-conducting oil boilers can operate stably even under low-pressure environment, and the temperature can be set by computer. The operation of the boiler is relatively stable, the control of the temperature is more accurate, and the thermal efficiency can reach more than 90%. Horizontal gas heat conduction oil boiler is an ideal heating equipment. It is widely used in various industries.

　　The heating surface of the boiler body of gas-fired oil-conducting oil furnace is compact in structure, and the heating surface is composed of inner and outer densely arranged disks. The inner coil tube is a radiation heating surface, and the outer surfaces of the outer coil tube and the inner coil tube constitute a convection heating surface. The boiler consists of an upper body and a lower combustion chamber, which are assembled on site. After the combustion is fully burned in the combustion chamber, most of the heat is absorbed by the radiation heating surface. The high-temperature flue gas enters the convection heating surface for heat exchange. After exiting the boiler, the air required for boiler combustion is heated in the air preheater, and then passes through the dust collector. The induced draft fan sends the flue gas to the chimney for discharge into the atmosphere.

　　The principle of the gas-fired oil-conducting oil furnace: Generally, natural gas is used as the fuel, and the heat-conducting oil is the heat carrier. The circulating oil pump is used to force liquid-phase circulation. After the heat energy is transferred to the heat-generating equipment, the heat carrier is then returned to the reheated DC-type special industrial furnace.

Basic parameters The basic parameters

Basic technical parameters of YY(Q)W Horizontal gas Thermal fluid (hot oil) heater

Model		YY(Q)W-700Y(Q)		YY(Q)W-1000Y(Q)		YY(Q)W-1200Y(Q)		YY(Q)W-1400Y(Q)		YY(Q)W-1800Y(Q)		YY(Q)W-2400Y(Q)		YY(Q)W-2800Y(Q)		YY(Q)W-3500Y(Q)
Rated heating load(KW)	MW/h	0.7		1.0		1.2		1.4		1.8		2.4		2.8		3.5
	x10⁴kcal/h	60		80		100		120		160		200		240		300
Desigen working temperature(≤℃)		320		320		320		320		320		320		320		320
Rated working pressur(MPa)		0.8		0.8		0.8		0.8		0.8		0.8		0.8		0.8
Heat efficiency(≥%)		88		88		88		88		90		90		90		90
System installed capacity(KW)		18		18		35		35		56		56		66		75
Maximum transport dimensions（mm）	长 L	3550		3800		3800		4250		4900		5250		6050		6650
	宽 W	1680		1680		2000		2000		2200		2450		2450		2550
	高 H	2050		2050		2400		2550		2600		2950		2950		3000
（kg） Weight of biggest part for transportation		4220		5000		5450		6400		8500		11200		12500		14000
Model		YY(Q)W-4200Y(Q)	YY(Q)W-4600Y(Q)		YY(Q)W-6000Y(Q)		YY(Q)L-7000Y(Q)		YY(Q)L-8200Y(Q)		YY(Q)L-9400Y(Q)		YY(Q)L-10500Y(Q)		YY(Q)L-12000Y(Q)	YY(Q)L-14000Y(Q)
Rated heating load(KW)	MW/h	4.2	4.6		6.0		7.0		8.2		9.4		10.5		12	14
	x10⁴kcal/h	360	400		500		600		700		800		900		1000	1200
Desigen working temperature(≤℃)		320	320		320		320		320		320		320		320	320
Rated working pressure(MPa)		0.8	0.8		0.8		0.8		0.8		1.0		1.0		1.0	1.0
Heat efficiency(≥%)		90	90		90		90		90		90		90		90	90
System installed capacity(KW)		95	95		140		140		140		200		200		240	300
Maximum transport dimensions(mm)	长 L	6850	6950		7200		8000		8500		9500		10500		12350	13500
	宽 W	2700	2850		3250		3550		3650		3800		3800		3800	4000
	高 H	3150	3310		3900		3950		4000		4000		4000		4000	4200
（kg）Weight of biggest part for transportation		15800	18000		24500		28500		33000		39000		55000		60000	65000

Note: Technical parameters are subject to change without notice.

Advantage The working principle of

Has a very thick thermal insulation layer to minimize heat loss;
Thickened boiler heat-resistant steel pipe is a guarantee of boiler safety, advanced technology and procedures ensure the safety and stability of the boiler, automatic flame alarm device, automatic control of boiler pressure and temperature;
The reasonable consistency of the boiler structure, the flow rate of the hot oil and the flow rate ensures that the tube does not burst due to carbon deposition, which not only ensures the safety of the boiler, but also prolongs the service life of the oil.
According to the user's requirements, it can be realized that a boiler can simultaneously output different temperature heat transfer oil to heat the heated body;
According to the user's requirements for different occasions, all equipment will be installed together and installed in the factory;
Horizontal boiler, neat appearance, generous, easy to operate, simple;
Controller centralized control, set automatic detection, control, chain alarm in one, boiler operation without duty;
The horizontal three return strokes are all back-structures. Adding energy savers is equivalent to a four-city structure. Higher thermal efficiency
The boiler has a large volume of water and a large amount of steam, reducing the frequent start-stop of boilers and extending the service life of burners and electronic components;
Fire tube structure, no squib occurrence, safer use;
Before and after the smoke box can be opened, boiler repair is very convenient.

Case Successful cases

8 MW YY(Q)W Thermal Fluid Heater

Project: Danyang Auxiliary Chemical Plant & 5 million kcal YY(Q)W Thermal Fluid Heater Project Customer: Danyang Auxiliary Chemical Co., Ltd. Company profile: Domestic high-level auxiliary chemical plant Project type: Complete Project (Supply boiler, auxiliary equipment, installation and commissioning) Address: Dangyang Zhenjiang Matched boiler: YY(Q)W-6000Y(Q) Boiler Medium: OIL Rated evaporation: 5million kcal

15 million kcal Thermal Fluid He

Cooperative Client: Shandong Honghai Chemical Co., LTD Type：Gas/Oil-Fired Thermal Fluid Heater Model: YQL-17500Q Thermal Fluid Heater Thermal Power: 15 million kcal Location: Shandong Application: Petrochemical Industry

Coal-Fired Thermal Fluid Heaters

Cooperative Client: Pteris Global (Vietnam) Co., LTD Type：Coal-Fired Thermal Fluid Heaters Model: YLW-17500M Thermal Fluid Heater Thermal Power: 15 million kcal Location: Vietnam Application: Mechanical equipment

News Related to recommend

The largest domestic thermal oil

　　On May 9, 2018, the YY(Q)L-23300Y(Q) heat-conducting oil boiler independently researched and developed by Zhongzheng Boiler was officially put into use at H

High-end testing equipment cast

　　Wuxi Zhongzheng Boiler Co., Ltd. is a designated manufacturer of boilers and pressure vessels approved by the General Administration of Quality Supervision,

Types Of Thermal Fluid Heaters

　　Thermal fluid heateris a new type Heat energy equipment, it uses coal, oil, gas or biomass as fuel, use thermal fluid as thermal circulating media
The Price Analysis of Thermal Fl

　　The main determinant of the thermal fluid heater’s price is the thermal power of the heater. In general, the price of the 0.7MW will be lower than the 1.4MW’s (note: the same fuel, the same devices). The price of various thermal fluid heater manufacture

Advantages of Thermal Fluid Heat

Thermal fluid heater can reach very high operating temperature under near normal pressure, it significantly decreases heater’s operating pressure and safety requirements; in thermal fluid heating system, output pressure is around 0.5 MPa while temperature

The R&D Cooperation between Shan

Zhang Guoping, chairman of Wuxi Zhongzheng Boiler Co., Ltd., met with the visitors Professor Luo Yonghao of Shanghai Jiao Tong University (called SJTU for short) Thermal Energy and Power School and his delegation at the headquarters
How to Select the Model of Therm

The heat transfer technology of thermal fluid heater has many advantages such as high temperature with low pressure, uniform heat transfer, precise temperature control, high efficiency and energy-saving, etc. It is more and more widely used in textile pri

Application of Thermal Fluid Hea

1, Synthetic Resin Manufacturing

　　Soken Chemical & Engineering Co., Ltd first designed and developed the heating and cooling system using thermal fluid in Japan, which is a general-purpose heating system. To adapt to the needs of intermittent operatio

Thermal Fluid Heater Manufacture

　Wuxi Zozen Boilers Co.,Ltd is a professional thermal fluid heater, steam boiler and hot water boiler manufacturer, annual turnover is more than 1500 sets, including 500+ thermal fluid heaters