Zozen Boiler

TEL: 400-161-0099

Inquire Now
Home / Product Center / Thermal Fluid Heater / YLW Biomass Organic heat carrier boiler
YLW Biomass Organic heat carrier boiler
YLW Biomass Organic heat carrier boiler
  • ModelYLW Biomass
  • FuelBiomass particles
  • Capacity1.4~29.2 MW
  • Pressure0.8 MPa
  • ApplicationPetrochemical industry, textile printing and dyeing industry, plastic and rubber industry, paper industry, oil industry, synthetic fiber industry, wood industry
Inquiry Now
7*24h Online 400-161-0099
Case Service
Product Detail Product introduction

  YLW series boiler is a square coil horizontal chain grate assembly boiler, chain grate and boiler body is delivered separately, after the site is in place, only need to turn on the oil, electricity can be put into operation, the furnace is realized by chain grate Mechanical coal, equipped with drums, induced draft fan for mechanical ventilation, and equipped with slag machine to achieve mechanical slag.

  During operation, the fuel falls from the coal hopper to the grate for combustion. The high-temperature flue gas passes through the rear arch and enters the furnace in front of the furnace. After radiative heat exchange on the radiant heat surface, it enters the convection heating surface for convection heat transfer, and then leads to waste heat. The boiler enters the air preheater and enters the precipitator. After the dust is removed, the exhaust gas is drawn by the induced draft fan through the chimney to the atmosphere.

  The boiler heating surface consists of four parts: the radiant heating surface of the furnace, the convection tube bundle heating surface, the waste heat boiler, and the air preheater (economizer).

Basic parameters The basic parameters
Basic technical parameters of YLW Biomass Organic heat carrier boiler
Project and parameter model Rated thermal power(KW) rated work pressure(MPa) Maximum operating temperature(℃) Suitable fuel Second class bituminous coal fuel consumption(Kg/h) Furnace oil content(m³) Circulating oil
(M³/h)
Inlet and outlet orifices(DN) Shipping weight
(t)
Maximum size of transport
L×B×H(mm)
YLW series YLW-1400MA 1400 0.8 <350 Class II bituminous coal, biomass pellets and other solid fuels 300 1.2 100 125 14 4121 1900 2900
YLW-1800MA 1800 0.8 <350 350 1.5 100 150 20 4400 2400 3000
YLW-2400MA 2400 0.8 <350 500 2.1 160 150 25 5680 2480 3240
YLW-3000MA 3000 0.8 <350 625 2.4 160 150 30 6000 2650 3240
YLW-3500MA 3500 0.8 <350 750 2.6 200 200 35 6400 2770 3470
YLW-4200MA 4200 0.8 <350 900 2.8 250 200 40 6900 2820 3470
YLW-4700MA 4700 0.8 <350 1100 3.0 250 200 44 7680 2985 3715
YLW-6000MA 6000 0.8 <350 1250 4.8 350 250 48 7900 3200 3475
YLW-7000MA 7000 0.8 <350 1500 7 460 250 50 8400 3300 3475
YLW-10000MA 10000 0.8 <350 2200 9.5 540 300 70 9200 3300 3550
YLW-12000MA 12000 0.8 <350 2700 12.8 600 350 142 12600 3820 3630
Note: Technical parameters are subject to change without notice.
Advantage The working principle of
  • With low pressure and high temperature characteristics;
  • Stable heating, precise control of temperature;
  • Keep thermal efficiency at optimum levels;
  • Complete operation control and safety monitoring device;
  • Reduce other consumption, save electricity, water and oil;
  • The fully digital portal milling machine ensures that the tube holes of the same type of tube sheet are exactly the same, eliminating individual deviations caused by manual scoring. It also overcomes the deviation of the roundness of the hole diameter caused by different stiffness when drilling the radial arm drilling machine;
  • Establish process inspection stop point, strictly guarantee the implementation of the first expansion after welding process;
  • Smoke pipes and convection pipes are all automatically welded;
  • The cylinder body is equipped with a turn-up device to ensure that the weld seam is in the best welding position;
  • Tube blanking, discarding the wheel cutting, all using machine tool cold processing, to ensure the processing accuracy and avoid overheating.
Case Successful cases
Project: Danyang Auxiliary Chemical Plant & 5 million kcal YY(Q)W Thermal Fluid Heater Project Customer: Danyang Auxiliary Chemical Co., Ltd. Company profile: Domestic high-level auxiliary chemical plant Project type: Complete Project (Supply boiler, auxiliary equipment, installation and commissioning) Address: Dangyang Zhenjiang Matched boiler: YY(Q)W-6000Y(Q) Boiler Medium: OIL Rated evaporation: 5million kcal
Cooperative Client: Shandong Honghai Chemical Co., LTD Type:Gas/Oil-Fired Thermal Fluid Heater Model: YQL-17500Q Thermal Fluid Heater Thermal Power: 15 million kcal Location: Shandong Application: Petrochemical Industry
Cooperative Client: Pteris Global (Vietnam) Co., LTD Type:Coal-Fired Thermal Fluid Heaters Model: YLW-17500M Thermal Fluid Heater Thermal Power: 15 million kcal Location: Vietnam Application: Mechanical equipment
News Related to recommend
Chat Top